A tide chart tells you when the water will be highest and lowest, and how high it'll be, in feet above a fixed zero. On US charts that zero is MLLW, mean lower low water. Once you know what that zero is, the rest is easy.
What MLLW means
Most coasts have two lows a day, and one is usually lower than the other. NOAA takes the lower of the two every day for 19 years and averages them. That average is MLLW, and it's the zero on the chart. A height of 2.3 ft means the water is 2.3 feet above that average lower low.
Why 19 years? The moon's orbit wobbles on an 18.6-year cycle, so NOAA averages over the whole cycle to get a zero that doesn't drift. The current period is 1983 to 2001, the National Tidal Datum Epoch.
The useful part: MLLW is also the zero on most US nautical charts. If the chart says 3 feet of water at a spot and the tide is +1.5, you've got about 4.5 feet, give or take what the wind's doing.
Minus tides
Because MLLW is an average, plenty of lows go below it. Those show up as negative numbers, like -0.8 ft. A minus tide means less water than the chart's soundings, and that's when bars and flats come out. The biggest ones come with king tides.
Highs, lows and the curve
- H and L are the high and low tides: the moments the water stops rising or falling. Our tide table writes them "H 3:18 AM 1.4", time first, then the height.
- The curve on a station page is NOAA's prediction every hour (or drawn between the highs and lows where NOAA only predicts those). The dot is now.
- Range is the high minus the low. A bigger range means more water moving, which means more current.

How to read the picture
The dark line across the middle is zero: MLLW, the average lower low. Every height on the curve is measured from it. Each high and low is written the way our tide table writes it, letter, time, then height, like "H 3:48 PM 2.1". The shaded dips below zero are minus tides, when there's less water than the chart's soundings show. The bar on the right is the range, the day's highest high minus its lowest low. The dashed line is now. This one is a made-up day, so check the station page for yours.
Times
Every time on TideCall is the station's local time, with daylight saving already handled. If you're in Houston looking at a Florida station, the times are Florida's. On the days the clocks change, the day is 23 or 25 hours long and the chart is drawn that way.
Predicted vs measured
The predicted tide comes from the moon and sun alone. The measured water is what the station's gauge actually reads. When a station has a gauge, the tide card shows both, like "Measured 1.1 ft ยท Predicted 0.9 ft". A gap of a few tenths is normal. A gap of a foot means wind, a river or a storm is moving the water more than the moon today. More in how tide predictions work.
On the Great Lakes
Great Lakes stations don't use MLLW. Their level is measured against IGLD 1985, a reference height about 570 to 600 feet above sea level depending on the lake, which is why Buffalo reads something like 571.6 ft. Watch the change, not the number.
Sources
- NOAA CO-OPS, tidal datums
- NOAA CO-OPS glossary
Last reviewed 2026-11-15. Sources are listed above.